You’ve tweaked your amp, your pedal settings are perfect, and you’ve found the exact tone you want. If you want to raise the volume but don’t want to muddy up your tone, that’s where a boost pedal comes in. A boost pedal’s pre-amp stages are designed to kick your guitar’s signal up a notch before it reaches the amp, so extra effects like distortion or fuzz aren’t inadvertently layered on. Whenever you want to give your killer shred solo a little extra oomph, the boost pedal will be your best friend.
Boost
Showing 1–40 of 169 results
-
Boost, Compressor
Amptweaker Pressurizer
The Amptweaker PressuRizer compressor is a powerful clean tone tweaker that provides sustain without compression. This mini pedal contains several switches and knobs, including Limit, Bloom, and Boost, all designed to provide you control over dry/wet blending, boost, as well as side-chain compression options. The PressuRizer boasts a 2-Step footswitch. Pressing and holding the switch locks the compressor on, while tapping it kicks in another boost knob, giving you a one-two punch with one button pedal.
SKU: n/a -
Boost
Amptweaker TightBoost
The Amptweaker TightBoost Boost Pedal has more volume, less gain, and delivers a cleaner boost to drive your amp harder. In addition to the famous Tight control, it also has a Mid boost control which gradually provides a Parked Wah tone, allowing you to conveniently add a modulated amount of “vowel” tone to your boost. The TightBoost pedal leverages distortion methods identical to the TightDrive, producing a warm, nice sounding, and tube-like breakup on its own when driven hard. It is nice to further overdrive an overdrive or distortion pedal or for delivering a solo boost to your amp.
SKU: n/a -
Boost, Overdrive
Animals Vintage Van Driving is Very Fun
Animals Pedal’s Vintage Van Overdrive/Boost Pedal is an extremely versatile stompbox that you can use for a quick, clean boost or add some medium-gain overdrive dirt to your sound with a single flick of a toggle switch. Under the OD mode, you can make even an amp at moderate levels sound like its tubes are being driven to the max, while in Boost mode you can use it to give your digital or tube amp a rich, full push. The Vintage Van Overdrive/Boost Pedal features artwork by Jonas Claesson and comes with true-bypass switching.
SKU: n/a -
Boost
Big Joe B-403 Vintage
The most transparent guitar effects pedal in Big Joe’s B-400 line, the Big Joe B-403 Vintage Tube perfectly captures the sound of an overdriven tube amp cranked right up to its distortion threshold. This stompbox has plenty of gain to spare, but it’s more about making full use of its broad dynamic responses; you get grittier, more biting tone the harder you pick and attack your guitar strings. The Big Joe B-403 Vintage Tube comes with a two-position toggle that lets you boost your tone’s low-end and features true bypass switching.
SKU: n/a -
Boost
Black Cat Pedals OD-Boost
The OD-Boost is a two-channel boost/overdrive pedal combining the OD-1 with a clean boost circuit. Both channels can be utilized individually or together simultaneously. The OD-Boost is a dynamic, robust, and extremely loud pedal that lets you find and explore the best grades of raw, unprocessed dirt. The pedal carries VOLUME and DRIVE knobs for the OD channel, and a BOOST knob to adjust the Boost channel’s level. The Boost and OD channels complement each other well, with several valuable combinations possible by changing the order of the channels and blending the circuits.
SKU: n/a -
Boost
Blackstar LT Boost
Blackstar’s LT Boost overdrive pedal allows you to push your amp over the edge. Its patent-applied-for gain circuit brings you every tube-like tone and response you wish. Unlike other boost boxes that carry only one knob, the LT Boost provides three controls—BASS, GAIN, and TREBLE. The BASS and TREBLE knobs can function as a frequency boost or cut. Delivering anything from warm boost to pushed overdrive tones, the Blackstar LT Boost will surely give you the edge you need.
SKU: n/a -
Boost, Overdrive
Bogner La Grange
The La Grange pedal was designed with various tone-shaping tools and to emulate the famed “plexus” amp tones. Guitarists appreciate tools that carry switches for gain, structure, presence, and variance. Controls include tone, gain, volume, and a channel blend simulating the two channels of a 4 input 67-69 plexus amp. Unlike the Ecstasy blue and red pedals, the La Grange features an independent boost with level adjust as well as an expression pedal input that allows you to connect a volume pedal’s output to adjust the La Grange’s gain.
SKU: n/a -
Boost
Caline Purple Smoke
The Caline CP-22 Purple Smoke Clear Boost is a budget-priced boost guitar effect pedal that does exceptionally well in boosting mid- and high-range tones. It’s powerful, highly transparent, and gives your guitar tone a more extensive dynamic range, making it a perfect addition to your pedalboard rig if you feel your guitar signal is coming in far too weak. The CP-22 Purple Smoke comes with a true bypass feature and can be powered by a 9V battery or compatible power supply.
SKU: n/a -
Boost
Caline White Heat
The Caline CP-29 White Heat Mixing Boost is a simple, transparent boost pedal that sets out to do one thing and do it well: giving your signal that extra push it needs to cut through the mix. Heavily influenced by the DOD 250 Classic Overdrive Preamp, the CP-29 features a Gain knob that gives you a subtle, super-transparent boost at lower levels and a full, rich overdrive tone the closer you set it to the max. The Caline CP-29 White Heat Mixing Boost comes with a true bypass feature.
SKU: n/a -
Boost, Overdrive
Carl Martin Hot Drive and Boost
The Carl Martin Hot Drive’n Boost creates tones ranging from crunchy blues to hard rock. It was thoroughly designed to emulate the sound of an old-fashioned distorting Tube-Amp. Most guitarists utilizing distortion as a significant of their sound seek a crisp and clear distortion with long sustain, exceptional tone and is desirable for chords not merely single notes. Carl Martin created the Hot Drive’n Boost to be an invaluable addition to your system to improve the sound from any tube amp.
SKU: n/a -
Boost, Overdrive
Carl Martin Hot Drive and Boost MKII
The Hot Drive’n Boost MKII by Carl Martin has been meticulously designed to emulate the sound of a delicate vintage distorting Tube-Amp. It is identical to the Hot Drive’n Boost but with a deeper and rougher sound. This two-in-one pedal provides you with an extra “kick” (up to 20db) for that attention-grabbing solos. The Hot Drive’n Boost MKII features an inbuilt regulated (+-12V) power supply. That allows Carl Martin to design top-grade circuitry with maximum headroom.
SKU: n/a -
Boost, Overdrive
Carl Martin Hot Drive and Boost MKIII
Achieve that tweaked boutique tube amp sound without disrupting your fundamental tone with the Carl Martin Hot Drive’n Boost MKIII. It boasts a unique overdrive design which provides a more authentic tube simulating overdrive compared to the revered original version. It has no midrange emphasis or low- or high-end cut. The Hot Drive’n Boost MKIII consists of Gain, Wave, Level, and Boost rotary knobs, plus Drive and Boost switches for activating and fine-tuning your sound. Up to a 20dB boost gives your solos the punch you desire.
SKU: n/a -
Boost
Carl Martin Hydra Boost
Flaunting a classic, pedalboard-friendly design, the Carl Martin Hydra Boost delivers a clean, 15dB low noise boost. It will give you some extra clean dB’s to boost your input on your amp for more sustain and bite. You can also utilize it to drive your distortion pedals for extraordinary results. The Carl Martin Hydra Boost features a 9V battery adapter, high bright blue LED indicator, rugged housing, vintage style pointer knob, and low noise design.
SKU: n/a -
Boost
Catalinbread Galileo
The Galileo Booster from Catalinbread puts the tone of legendary Queen guitarist Brian May within a box on your pedalboard. Its Gain, Tone, and Volume knobs, in concert with its Rangemaster/AC30 preamp section circuitry, gives you May’s distinctive throaty mid-range and jangly crunch. May still has a treble-booster in his rig to ensure that life is inserted into his tone from the outset. You can now do the same with the Catalinbread Galileo Booster—your go-to treble-boost overdrive.
SKU: n/a -
Boost, Overdrive
Catalinbread Sabbra Cadabra
The Catalinbread Sabbra Cadabra is capable of transforming your setup into the “rig of doom.” It is a custom-tuned Rangemaster-based treble booster coupled with a Laney Supergroup preamp section. It will bring your tone to the dark side on its own, but you have Volume 4 (named after the album), Gain, Range, and Presence knobs to better fine-tune and shape your sound. The Range knob allows you to select frequency response from treble-only to full-range boost.
SKU: n/a -
Boost, Distortion, Fuzz, Midi, Overdrive
Chase Bliss Audio Brothers
Designed in partnership with Resonant Electronic, the Chase Bliss Audio Brothers Analog Gainstage pedal boasts 33 routing options and two independent JFET/IC analog channels, providing you full control over stacking and combining the circuits of your choice. This pedal crams six unique fuzz, drive, or boost circuits within one compact enclosure, making it an excellent choice for gigging musicians looking to build a tiny, diverse pedalboard for travel or smaller shows. Players with single-channel amps seeking more variety will love the Brothers Analog Gainstage pedal.
SKU: n/a -
Boost, Equalisation, Filter, Midi, Overdrive, Tremolo
Chase Bliss Audio Condor
The Chase Bliss Audio Condor multi-effect pedal enables control over a broad range of effects, including tremolo, boost, overdrive, EQ, and filter tones. Boasting the ability to store presets and a potent parametric mids control, the Condor proves to be as majestic and powerful as the bird it is named after. This pedal also features a switchable overdrive circuit for shaping the guitar tone you want. The overdrive circuit complements stacking, so using it together with your favorite overdrive stompbox is recommended.
SKU: n/a -
Boost
CNZ Audio Booster
Like other CNZ Audio products, the Booster Guitar Effects Pedal boasts exceptional build quality and pretty vintage rocket design. Its compact size makes it lightweight, travel-friendly and leaves plenty of space on your pedalboard. The Booster Guitar Effects Pedal can boost your sound to deliver your ideal tone. Couple your guitar with this pedal and they will produce a magnificent dynamic sound for different genres. Powerful yet easy to use, the Booster Guitar Effects Pedal caters to budding and advanced guitarists alike.
SKU: n/a -
Boost
Creation Audio Labs MK 4.23
Creation Audio Labs touts the MK.4.23 Clean Boost as the purest, most transparent clean boost pedal on Earth–and this rugged little stompbox has the sonic muscle to back that claim. You can use the MK.4.23 as a simple clean boost to push your solos above the mix or crank your tube amp up to high saturation overdrive levels. The MK.4.23 can also act as a Direct Inject (DI) box that keeps your signal fidelity together when you plug it straight into a mixer’s line input or DAW interface.
SKU: n/a -
Boost
Danelectro BB-1 Billion Dollar Boost
The Danelectro BB-1 Billion Dollar Boost pedal not only increases your tone’s volume and responsiveness, but it also gives you enough EQ versatility to keep that boosted signal under your complete control. You get plenty of gain via the Volume knob, plus there are dedicated Treble and Bass knobs for controlling the mix. There’s also a two-way selector switch for Flat and Low Cut modes, the latter of which lets you drop the lower frequencies to add a subtle variation to your sound.
SKU: n/a -
Boost
Danelectro The Breakdown
The deceptively innocuous Breakdown guitar effect pedal from Danelectro is basically a tiny six-stage gain booster that serves up everything from light, subtle dirt to smooth overdrive and further on to heavy, full-on distortion. Set the gain level with the Break-Up rotary switch and shape it further with the pedal’s Volume knob as well as your guitar’s own volume controls. This slim form stompbox doesn’t run on battery juice and needs to be connected to a compatible 9V power supply.
SKU: n/a -
Boost
DOD BiFet Boost 410
Providing a powerful boost with slight grit, the DOD BiFet Boost 410 will kick your guitar amp into overdrive. The revamped BiFet Boost 410 includes a selectable Buffer On/Off toggle switch that affects its bypass state and provides flexibility to be integrated anywhere in your signal chain and pedalboard. Independent Tone and Volume knobs allow you to dial in the right amount of boost and bite. Whether you utilize it to throttle your tube amp or for subtle tone shaping, the BiFet Boost 410 is a handy weapon for all guitarists.
SKU: n/a -
Boost, Distortion, Midi
Donner Boost Killer
Often likened to the Xotic RC Booster, Donner’s Boost Killer pedal is arguably one of the most aggressive boost effects available. For a budget-friendly effects pedal, it loads plenty of heat, making it an attractive option. If you are looking to enter the world of boosters, the Boost Killer could be a great starting point. Even with its lightweight and compact enclosure, this pedal features a bit more generous controls than your standard booster design. It consists of Treble, Bass, and Volume controls along with a dominant Gain knob.
SKU: n/a -
Boost, Midi
Donner Booster
The Donner Booster is an all-analog circuit booster pedal capable of providing you with a lush distortion sound and making it more powerful. It is perhaps the tiniest analog booster effect in the market. The Booster lets you switch between Mid and Normal modes to adjust the effect of the Metal drive. Tweaking the Gain knob gives you a transparent frequency boost. Complete with basic adjustment knobs (Volume, Tone, and Gain), the Booster will make it convenient for you to craft your unique guitar sound in various live performances.
SKU: n/a -
Boost, Distortion, Midi
Donner Giant Metal
The Donner Giant Metal is an invaluable, insane distortion pedal within an aluminium-alloy chassis. The Hi Boost gives you the most expressive metal sound. Showcasing a more flexible and sharper metal sound by selecting three mods and adjusting three sound buttons. That gives you abundant impressive metal sound conveniently. Three modes include Hi Boost, Boost Off, and Lo Boost. Improving the pedal’s high frequency makes the heavy tone-color and hard skills perform better. The Giant Metal enables you to design your unique guitar sound in various live performances swiftly.
SKU: n/a -
Boost
Dophix Perseo
The Perseo boost pedal is part of Dophix’s Three Naked Men trilogy. The series draws inspiration from the three statues seen in Piazza della Signoria: the Neptune by Ammannati, David by Michelangelo, and Perseus by Benvenuto Cellini. The Perseus is known for its excessive attention to details and languid pose. The Perseo pedal is perfect for providing dynamics to the sound, exalting the harmonica produced by your guitar. It is convenient to use, carrying only one knob, and just like the Perseus, it is extremely powerful.
SKU: n/a -
Boost, Preamp
EarthQuaker Devices Arrows
The Arrows Preamp Booster from EarthQuaker Devices is so no-nonsense it’s almost zen. With its lone dial, you can either boost or cut your signal to give overdrive and distortion pedals an extra gain and sustain boost, boost the mids of bass-heavy effects, tighten up your low end and brighten the highs, or just make your guitar signal float to the top of the mix. The Arrows is all-analog, all-discrete, and an all-around essential addition to any pedalboard.
SKU: n/a -
Boost, Equalisation
EarthQuaker Devices Tone Job V2
It’s not easy to cram the tone-sculpting capabilities of an audiophile-grade stereo preamp into a compact stompbox, but EarthQuaker Devices did exactly that with the Tone Job EQ and boost guitar effects pedal. The Treble, Bass, and Mid control knobs each have up to 20db of cut or boost, so you get a wide range of frequency responses from your signal. And speaking of your signal, the Level knob can kick it up by up to five times its original input level, letting you soar through the mix when you need a boost.
SKU: n/a -
Boost
Electro-Harmonix Analogizer
Want to get a more analog sound out of your digital guitar effects pedals? Wrap your effects-laden signal up in a thick layer of analog warmth with the Analogizer, a unique preamp pedal from Electro-Harmonix. The Analogizer processes digital effects signals using an all-analog circuit and sprinkles it with a touch of lo-fi analog bits and pieces. Needless to say, put the Analogizer after any and all digital effects whose cold, by-the-numbers tone you want to thaw out.
SKU: n/a -
Boost, Preamp
Electro-Harmonix LPB-1
The original LPB-1 circuit was instrumental in the arrival of the age of overdrive in the late ‘60s. Electro-Harmonix has recreated that exact same circuit for its LPB-1 Linear Power Booster pedal reissue. With the LP-B 1, you can achieve full control over the gain and saturation levels of any amp you want. Plug it in ahead of the other effects in your effects chain and you can easily increase their attack and sonic definition.
SKU: n/a -
Boost, Distortion
Electro-Harmonix Metal Muff
As you can tell from its name, the Metal Muff with Top Boost distortion pedal from Electro-Harmonix was built to do one thing: wreak massive metal mayhem. The unique Top Boost feature boosts your signal’s high end, letting you go from rib-rattling rhythm to full-on shred mode with a single stomp. The Metal Muff packs a three-band EQ for shaping your low-end, mids, and top-end just the way you want them, plus it comes with true bypass.
SKU: n/a -
Boost
Electro-Harmonix Screaming Bird
Whenever you need your guitar’s high frequencies to cut through the mix, the Screaming Bird is the right stomp for the job. This aptly-named treble boost guitar effects pedal from Electro-Harmonix can give your top end up to 20dB of pure boost. It also lets you sculpt the center frequency between 1.6kHz and 2.4kHz. Whether you want just the right amount of extra high-frequency bite for shimmering treble notes or push your tube amp to the brink of destruction, the Screaming Bird will definitely get you noticed.
SKU: n/a -
Boost
Electro-Harmonix Signal Pad
Got a great-sounding overdrive or distortion on your amp but no easy way to switch between it and a clean rhythm tone? You need the Signal Pad passive attenuator from Electro-Harmonix. It lets you preset a volume setting on your amp and then use the Signal Pad’s own Volume control to bring it back down to a clean-sounding tone. Stepping on the Signal Pad’s footswitch then lets you switch quickly between your amp’s dirty, distorted volume setting and your preferred clean volume setting.
SKU: n/a -
Bass, Boost
Electro-Harmonix The Mole
Dig deep into the bowels of your sound to unearth low-end frequencies that are positively subterranean. The Mole bass booster pedal from Electro-Harmonix gives your signal’s low frequencies a rich tone and a 20dB boost. Operation is dead simple: dial in the amount of boost via the Boost knob and step on the footswitch to start rattling ribcages. Whether you’re a guitarist or a bassist, this little critter will let you plumb the depths of your bottom end.
SKU: n/a -
Boost, Distortion, Overdrive
Emerson Custom Pomeroy
Emerson Custom’s Pomeroy loads a highly customizable overdrive and powerful boost into a pedalboard-friendly, pure analog stompbox. Its overdrive side features six clipping options so you can tweak it to your liking, while the boost side is capable of up to 24dB of clean, full-range gain. The Pomeroy is an excellent choice because of its massive headroom and handy options. You may use the overdrive and boost circuits individually or together. Regarding flexibility, comfort, and power, the Pomeroy is tough to beat.
SKU: n/a -
Boost, Distortion, Overdrive
Emerson Custom Pomeroy Black
With the Emerson Custom Pomeroy, you get an overdrive with flexible tonal shaping and powerful boost within a pedalboard-friendly, pure analog stompbox. The overdrive side features six clipping options that ensure the pedal will integrate seamlessly into any rig you are running. It also includes an active three-band equalizer for more tone shaping. Meanwhile, the Pomeroy’s boost side boasts up to 24dB of clean, full-range gain for driving your amp or getting louder in the mix.
SKU: n/a -
Boost, Buffer
Empress Effects Buffer Plus
The Buffer+ by Empress Effects features an incredibly handy set of features that will make your life a little better. Switchable clean boost, noise filters, input loading, and input pads are all potent tools you can find on the Buffer+. It was constructed to become the perfect I/O interface for your pedalboard while keeping the highest fidelity of your guitar signal. It will eliminate the signal loss caused by long, unbuffered cable runs, guaranteeing that your tone stays unaffected by your cables.
SKU: n/a -
Boost, Equalisation
Empress Effects ParaEq
If you are continuously aiming to improve your tone, it’s about time to unleash the ParaEQ’s power on your instrument. It features a very transparent, sweet-sounding EQ, letting you refine your sound without covering your instrument’s tone. The ParaEQ gives you all the control you need—a switchable Q, 15dB of cut and boost, and over-lapping sweepable frequency selection. The Empress ParaEq w/Boost leverages true bypass to ensure that it will not affect the signal when disengaged.
SKU: n/a -
Boost
Fender Engager Boost
Whether you are looking for a thicker tone or more volume, the Engager Boost from Fender is the perfect clean boost pedal. The onboard three-band EQ allows you to dial in your tone to cut through the mix, while the Frequency switch enables you to choose the middle frequency range, perfect for dead-on tone sculpting. The Engager Boost is suitable for boosting your signal into a tube amp’s preamp, beefing up your tone. Buffered and true bypass modes guarantee that this pedal works exceptionally in any rig.
SKU: n/a -
Boost
Friedman Amplification Buxom Boost
Taking its cue from Friedman Amplification’s Buxom Betty amp head, the Buxom Boost pedal lets you push a clear, uncorrupted tone to the absolute limit without coloring its tonal characteristics. Use the Buxom Boost’s three-band EQ for a wide range of tonal possibilities, or disengage the EQ circuit stack completely with the EQ Bypass switch for pure, transparent, boosted tone. There’s also a dedicated Tight knob that lets you rein in your low end for added sonic definition while boosting your signal.
SKU: n/a
