The DS-3 Classic Distortion from NUX is an analog distortion pedal that gives you classic distortion tones ideal for heavy blues and classic rock. It boasts true bypass and plenty of dynamics. It cleans up beautifully when you turn your guitar volume down. The DS-3 Classic Distortion consists of Level, Tone, and Gain knobs. The wide-ranged Tone knob and Gain control allow you to produce well-balanced sounds. Analog circuits enhance your signals and create strong overdrives and more harmonics.
Brand: NUX
Features:
Publisher: Cherub Technology Co,.Ltd
Details: Specifications: Material of housing: Aluminum alloy. Effect types: 12 modulation models. Presets: Up to 9 storable user presets plus. manual mode. Sampling frequency: 44.1 kHz. A/D converter: 24-bit. Signal processing: 32-bit. Frequency response: 20Hz-20kHz 1dB. THD+N: 93dBu (
| Brand | |
|---|---|
| Category |
The Amptweaker TightMetal ST Distortion Pedal takes the famed TightMetal pedal with its aggressive metal and hardcore crunch tones and incorporates Amptweaker’s proprietary SideTrak effects loop, which works only when the pedal is off. The loop lets you alternate clean effects, or a different distortion pedal, with one stomp, eradicating the stomp-box tap-dance. The TightMetal ST boasts a High/Low gain switch to choose vintage or modern metal tones. It also features a Thrash EQ switch for a deeper mid-scoop and inbuilt noise gate for extremely tight stops.
The Blackstar HT-METAL distortion pedal lets you plug into untamed, high-gain metal tones. If you want molten-hot tones that maintain definition and dynamics, the HT-Metal’s high 300-volt operation and cascaded valve gain stages will surely satisfy your metal cravings. Two channels allow you to select the ideal pair of distortion settings, and Blackstar’s patented infinite shape feature (ISF) and three-band EQ enable powerful tone shaping. The speaker-emulated output allows you to connect the HT-Metal directly to a recording device or sound system for a seamless way to achieve a good sound.
As its name hints, Amptweaker’s FatMetal creates a thick, rich distortion with a warmer overall tone compared to the TightMetal pedal. It is a professional-quality tool packed with valuable features that exhibit an unmatched devotion to practicality and quality. It features Tight, Gain, Tone, and Volume controls. A trio of mini switches lets you select noise gate on/off, normal/thrash tone, and normal/black gain boost settings. FatMetal is among the few metal distortion pedals whose sound does not immediately vanish while performing with a full band.
Ammoon’s DTC multi-effects unit is a budget-friendly four-in-one stompbox that combines three different effects with an effects loop function. Even if you don’t count the effects loop as an effect, the four-in-one designation still kinda works since the distortion section is actually split into two voicings: a vintage-leaning Crunch-style sound and a more modern high-gain tone based on the Riot. The DTC also comes with an overdrive section based on the TS9 Tube Screamer and a delay with a range of 25ms to 600ms.
Amptweaker’s TightMetal JR ranges from FatMetal to TightMetal tones and features a Tight attack switch and noise gate. With the crazy output level available through the Volume knob, Tight settings (Fat/Flat/Tight), EQ voicings (Thrash/Flat/Smooth), and punchy midrange you can cut or boost using the Tone control, you can virtually run a tone party from Black Sabbath to Avenged Sevenfold to Kyuss and so on. The TightMetal JR is worth exploring as each twist and turn could create new vistas of snarl, growl or singing sustain.
There are no reviews yet.