Marshall arguably counts as among the most prominent names in electric guitar amplification. With its famed amps adorning the stages of several big names in rock, its products remain a popular choice today. Famous for its signature “crunch,” Marshall has been a game changer in creating the saturated “distorted” sound you are familiar with. Having renowned players such as Joe Satriani, Zakk Wylde (Black Label Society), and Angus Young (AC/DC) in its roster, Marshall’s reputation is at its best.
Marshall
Showing all 13 results
-
Overdrive
Marshall Bluesbreaker II
This modern redesign of the famous Marshall Bluesbreaker overdrive guitar effects pedal faithfully captures the tonal characteristics that made the original one of the world’s most well-loved stompboxes. The BB-2 Bluesbreaker serves up everything from a subtle “tube valves starting to break up” drive to scorching hot lead tones. To make the BB-2 Bluesbreaker even more versatile, Marshall added a transparent boost function that can push your signal through the mix. You can switch between Blues and Boost mode via a rotary selector knob.
SKU: n/a -
Delay
Marshall Echohead
The Marshall EH-1 Echohead delay guitar effects pedal spits out everything from syncopated, accurately-tracked echoes to vintage, tape machine-style delays. This fully adjustable stomp comes armed with six different delay modes—Hi Fi, analog, tape echo, multi tap, reverse, and mod filter—all accessible via a rotary selector knob. For maximum iron-fisted delay control, the EH-1 Echohead features separate delay time and feedback control knobs. It’s built tough and has a tap tempo feature so you stay locked into the groove when you’re on stage.
SKU: n/a -
Compressor
Marshall Edward Compressor
The ED-1 Edward compressor guitar effects pedal from Marshall gives you more level and sustain than you can normally wring out of your guitar. The ED-1 Edward features attack and compression controls for dialing in your perfect sonic settings precisely. A dedicated emphasis control also lets you choose whether you want to apply more compression to highs or to lows. The ED-1 Edward gives you full tonal flexibility, whether you’re laying down a rhythm part or screaming through a solo.
SKU: n/a -
Distortion
Marshall Guv’nor Plus
The GV-2 Guv’nor Plus is an updated version of Marshall’s acclaimed Guv’nor overdrive guitar effects pedal from the ‘80s. It lets you flow from light, highly transparent overdrive to saturated lead tones and all the way through to an aggressive JCM-flavored growl. Loud, proud, and very versatile, the GV-2 Guv’nor Plus features a full complement of EQ controls for whipping your tone into shape. You also get a dedicated volume knob so you can gain-stack and give your signal even bigger boosts.
SKU: n/a -
Distortion
Marshall Jackhammer
Marshall’s been perfecting the overdrive and distortion tones on their highly-acclaimed amps for over half a century. They’ve used that expertise to build the JH-1 Jackhammer, a versatile guitar effects pedal that packs the legendary Marshall crunch and then injects it with huge amounts of gain. You get two distinct modes; one gives you the classic crunch of the JCM 800 while the other pushes your signal into the JCM 2000’s highly saturated lead tone territory.
SKU: n/a -
Reverb, Switching
Marshall Original Footswitch
Every good pedalboard setup needs an amp footswitch or two. If you’re gunning your signal through a Marshall amp, then there’s no better fit than a Marshall footswitch. The PEDL-10009 or P802 footswitch is a dual footswitch pedal; it’s basically the big brother of the P801. This musician must-have is built to work with both valvestate and tube amps and handles switching duties for your amp’s channels and reverb. It’s built to be road-tough, so you don’t have to worry about it conking out while you’re onstage.
SKU: n/a -
Switching
Marshall P801
Every good pedalboard setup needs an amp footswitch or two. If you’re gunning your signal through a Marshall amp, then there’s no better fit than a Marshall footswitch. The Marshall PEDL-10008 or P801 single latching footswitch pedal gives you full control over your amp’s Channel signal. Run your guitar signal through the clean channel for softer passages, then use the P01 to seamlessly switch to the overdrive channel when it’s time to bust out a scorching-hot solo.
SKU: n/a -
Switching
Marshall PEDL-00001
Every good pedalboard setup needs an amp footswitch or two. If you’re gunning your signal through a Marshall amp, then there’s no better fit than a Marshall footswitch. This goes double for Marshall’s AS acoustic series amps. The PEDL-00001 single latching footswitch was specially built to handle channel switching duties for AS amps like the AS50D and the AS100D. It’s built to be road-tough, so you don’t have to worry about it conking out in the middle of an intimate acoustic set.
SKU: n/a -
Switching
Marshall PEDL-00021
Every good pedalboard setup needs an amp footswitch or two. If you’re gunning your signal through a Marshall amp, then there’s no better fit than a Marshall footswitch. The Marshall PEDL-00021 five-button footswitch is built specifically for the company’s TSL series of amps. It’s durable, road-tough, and gives you complete one the fly access to your TSL amp’s three separate clean, crunch, and lead channels plus the built-in reverb and the TSL amp’s effects loop.
SKU: n/a -
Switching
Marshall PEDL-90008
Every good pedalboard setup needs an amp footswitch or two. If you’re gunning your signal through a Marshall amp, then there’s no better fit than a Marshall footswitch. The Marshall PEDL-90008 is a four-way momentary or non-latching footswitch designed specifically to work with the company’s MG15FX, MG30FX, MG50FX, MG101HFX, MG101FX , and MG102FX amps. It can be fully programmable via the amp and features built-in indicator lights so you don’t lose track of where you’re throwing your guitar signal.
SKU: n/a -
Switching
Marshall PEDL-91003
Every good pedalboard setup needs an amp footswitch or two. If you’re gunning your signal through a Marshall amp, then there’s no better fit than a Marshall footswitch. The Marshall PEDL-91003 two-button footswitch is a dual latching footswitch pedal that gives you hands-free control over the company’s DSL401, VS100R, SV100RH, and VS102R amps. It features a stereo jack connector and each footswitch has its own indicator light so you don’t lose track of which channel you’re feeding your guitar signal into.
SKU: n/a -
Chorus, Flanger, Phaser
Marshall Regenerator
Give your pedalboard an extra dose of ambiance with the RG-1 Regenerator, a two-in-one chorus and phaser guitar effects pedal from tone masters Marshall. Think of it as the ‘80s sound crammed into a sturdy, compact stompbox. You get six easily customizable modes: chorus, M chorus, flanger, phaser, step phaser, and V vibe, with the latter two being particular standouts. Separate speed and depth dials let you tailor the RG-1 Regenerator’s sound to your exact tonal tastes, plus there’s a dedicated knob for controlling the effect’s intensity.
SKU: n/a -
Vibrato
Marshall Vibratem
As its name suggests, the VT-1 Vibratrem guitar effects pedal from tone masters Marshall is a two-fer, packing selectable vibrato and tremolo effects in one sturdy and compact stompbox. Dedicated speed and depth controls let you flow smoothly from a gentle pitch variation to an aggressive tremolo effect. You also get a shape knob for further tweaking, letting you switch between a smoother triangle and a sharper square waveform. Slap a 9V battery into the VT-1 Vibratrem, hit that footswitch, and sail off on a wave of classic vibrato and tremolo sounds.
SKU: n/a
