Switching

Compact yet versatile, the Lehle Parallel line mixer is capable of fulfilling demanding tonal standards. It combines the signals from effect units with the original signal. Return and send levels are individually adjustable. You can operate the return and send paths both balanced and unbalanced. The Lehle Parallel boasts an exceptional dynamic range and comes in two variants: the Parallel L and the Parallel M. The Parallel L features a true bypass switch with gold-plated contacts. It includes separate levels for return, send, and mix, giving you various options.

Get yourself the FBV2, and you no longer have to carry around a full-sized foot controller. It allows you to browse through the first bank of four presets. This two-button footswitch is lightweight and compact enough to fit inside your gig bag. Boasting an aluminum housing, road-ready metal construction, and extremely reliable switches, the FBV2 can withstand any abuse you throw at it. It is compatible with Spider Valve, Flextone III, HD147, Vetta, Vetta II, and others.

Every good pedalboard setup needs an amp footswitch or two. If you’re gunning your signal through a Marshall amp, then there’s no better fit than a Marshall footswitch. This goes double for Marshall’s AS acoustic series amps. The PEDL-00001 single latching footswitch was specially built to handle channel switching duties for AS amps like the AS50D and the AS100D. It’s built to be road-tough, so you don’t have to worry about it conking out in the middle of an intimate acoustic set.

Every good pedalboard setup needs an amp footswitch or two. If you’re gunning your signal through a Marshall amp, then there’s no better fit than a Marshall footswitch. The Marshall PEDL-00021 five-button footswitch is built specifically for the company’s TSL series of amps. It’s durable, road-tough, and gives you complete one the fly access to your TSL amp’s three separate clean, crunch, and lead channels plus the built-in reverb and the TSL amp’s effects loop.

Every good pedalboard setup needs an amp footswitch or two. If you’re gunning your signal through a Marshall amp, then there’s no better fit than a Marshall footswitch. The Marshall PEDL-90008 is a four-way momentary or non-latching footswitch designed specifically to work with the company’s MG15FX, MG30FX, MG50FX, MG101HFX, MG101FX , and MG102FX amps. It can be fully programmable via the amp and features built-in indicator lights so you don’t lose track of where you’re throwing your guitar signal.

The Micro ABY MKII channel switch pedal from budget stomp maker Mooer is one of the most well-executed, versatile, and affordable channel switchers available on the market today. You get the standard AB/Y setup–send an instrument signal to both or either of two amps—but with an extra Mooer twist. See, the jack goes both ways, so you can also send two separate instruments into one amp individually (an electric for one song and an acoustic for another, for example) or simultaneously.

Morley’s ABY Mix Mixer/Combiner pedal lets you route any two input signals to any two outputs. You can, for example, quickly switch between an electric and an acoustic in between songs without having to mute your electric, unplug it, then plug the acoustic into your amp. Each input section has its own independent level control and LED indicator for quick visual feedback so you don’t forget which amp is active. The ABY Mix also features Morley’s True-Tone bypass buffer circuit to ensure your core tone shines through.

Exquisite engineering and dead simple controls are the hallmarks of Morley ABY Pro two-button signal switcher unit. You can use it to feed your guitar signal into two separate amps for a true stereo effect, switch between two different amps for rhythm and lead parts, or bypass your effects loop to let your pure clean tone shine through. The ABY Pro features silent switching and a custom Ebtech 1:1 isolation transformer for unsurpassed signal transparency.

The Dual Switch footswitch pedal from budget guitar effects pedal brand Mosky Audio has one job: act as a dual momentary footswitch controller for your other guitar effects pedals. In stompbox terms, momentary (also known as non-latching) means the pedal’s effect is only active for as long as you hold the footswitch down. This is different from the typical latching operation–stomp once to activate then stomp again to turn off–that regular stompboxes have. Note that the Dual Switch is not a channel selector or AB/Y controller.

The MXR A/B Box serves as your economic and easy signal switching solution. It lets you route your instrument signal to two different output amp paths. It allows you to change between amps or run them simultaneously with individual effect settings so you can discover your ideal sound. You may employ the Thru jack to connect to an amp, tuner, or other devices that you want to receive a steady signal. The A/B Box is housed within a sturdy die-cast housing with high-quality switches and jacks.

The Tap Tempo switch by MXR includes adjustable tip/ring configuration, allowing you to manage the delay time of an extensive range of delay pedal types. This pint-sized footswitch is solidly constructed for durability and will sit snugly between your other pedals. The tip/ring configuration is compatible with any pedalboard cable or instrument to connect conveniently to your pedals. The Tap Tempo switch lets you control your tempos and is sure to be a celebrated addition to your board.

The NMP-2 Dual Footswitch from NUX is a universal two switch controller with Latch, Open, and Close modes. It is a mix of WTB-005 (momentary) and latch type controllers. This multi-foot controller is intended for arranger instruments (modules, keyboards, effect pedals, and others). This controller allows you to conveniently activate all the primary functionalities of the equipment. The NMP-2 Dual Footswitch is compatible with NUX Cerberus, NUX Loop Core Deluxe, and NUX JTC Drum & Loop PRO.

Level up your looping capabilities and add new functionality to your Infinity Looper with the Infinity Remote from Pigtronix. It is a dual momentary switch created to complement your Infinity Looper pedal. Unlocking the full potential of the Infinity Looper pedal, this portable remote switch gives you access to reverse, redo, and undo functionality along with several other hidden features. The Infinity Remote enables REC-overdub-play and instant clear of individual loops. It consists of Reverse and Undo buttons.

The Big Shot Mix by Radial Engineering lets you blend your instrument’s direct sound with effects like how a professional mixing console allows you to add reverb to a dry vocal. It is configured for demanding guitarists and bassists who wish to introduce excellent effects pedals to their signal path, less the noise and artifacts resulting from cheap buffers and poor circuitry. Similar to other Radial pedals, the Big Shot Mix boasts solid, roadworthy construction and a durable footswitch.

The Headbone by Radial is a sophisticated head switching tool that enables you to use two guitar amp heads with one speaker cabinet. Boasting an entirely discreet class-A circuitry and choice between unbuffered and buffered inputs, players who want the ultimate in tonal performance will appreciate the Headbone. Its internal switching consists of a sequence of relays, load resistors, and photocells, all are controlled using a digitally programmed chip. The Headbone features models for solid-state (SS), tube amps (VT), or both (TS).

The Radial Tonebone JX-2 Pro Switchbone is an outstanding AB-Y switcher, letting you drive two guitar amps simultaneously without producing hum, noise, or coloration. You can also change between amps without any hassle. The Tonebone JX-2 Pro Switchbone leverages the class-A circuitry found in the revered Radial JD7 Injector for stellar audio performance. This portable device has been optimized for manageable yet utmost performance. It boasts an intuitive Drag Control feature and inbuilt Power Boost circuit with mid control.

With the Twin-City AB/Y Amp Switcher from Radial Engineering, you can connect to two guitar amps and run them simultaneously sans losing gain, noise, or degrading your original guitar tone. The design starts with Radial’s legendary class-A buffer for a very natural tone. To eradicate buzz and hum from ground loops, the Twin-City features an isolation transformer on output B. As a buffer, it reduces impedance and susceptibility to noise, making it an excellent signal driver for big stages when employing lengthy cable runs.

The Tap Tempo Switch by Source Audio is a simple footswitch that adds significant functionality to any pedal from the One Series line. It gives you on-the-fly tap tempo control of delay times for the Nemesis Delay and modulation rates for the Mercury Flanger, Gemini Chorus, Lunar Phaser, and Vertigo Tremolo. The Tap Tempo lets you render virtual knob changes to each One Series pedal, toggle between distortion engines on the AfterShock Bass Distortion, Kingmaker Fuzz, and L.A. Lady Overdrive, or externally scroll through presets on the Nemesis Delay.